Showing all 4 results
differential carrier 夹具描述：夹具采用零件中心定位、凸轴角向定位、端面轴向定位，端面夹紧加工正上面各孔及凸台面。 Fixture description: The fixture adopts the central positioning of the parts, the angular positioning of the convex shaft, the axial positioning of the end face, the end face clamping processing is the above holes and the convex table.
夹具描述：夹具采用顶尖尾座支撑、三爪卡盘夹紧，四轴旋转加工轴侧面各孔。 Fixture description: The fixture is supported by the center tail seat, the three-jaw chuck is clamped, and the holes on the side of the shaft are rotated by four axes.
夹具描述：夹具采用小端面内孔、大端面内端面定位，轴侧面通孔定角向，上端面夹紧方式加工上端面所有孔。 Fixture description: The fixture adopts the small end face inner hole, the large end face inner end orientation, the shaft side hole fixed Angle, the upper end face clamping method processing all the holes on the upper end face.
夹具描述：夹具采用两端面内孔定位、一端固定另一端夹紧方式加工轴面上孔。 Fixture description: The fixture adopts two internal hole positioning, one end fixed and the other end clamping method to process the shaft surface hole.
Precision Machined Parts | CNC Turned Parts | CNC Machined Parts | Hydraulic clamps| Pneumatic clamps| Lathe clamps| Fixture | XIOCHUTECH is dedicated to providing quality product.
COPYRIGHTS © 2024 XIONGCHU TECH, ALL RIGHTS RESERVED