# 1 exhaust camshaft
夹具描述：夹具采用端面定位、V型块定角向、两端加紧方式钻攻端面螺纹孔。 Fixture description: Fixture using end positioning, V-shaped block fixed Angle, both ends of the way to drill and tap the end thread hole.
Showing 1–16 of 32 results
-
-
138 The flange 法兰
夹具描述：夹具采用上下两端面内孔定位、油缸向上两端夹紧方式加工端面六孔。 Fixture description: The fixture adopts the upper and lower inner hole positioning, and the cylinder is clamped up at both ends to process the end six holes.
-
Back-disconne clampct switch lower seat
Product name: Back-disconnect switch lower seat
Clamp description: The clamp uses a spring to expand the outer circle, the side angle is positioned, and the red part of the part is processed on the four axes. -
Bracket Fixture
Product name: Bracket Description of fixture: The fixture adopts six-point positioning and processes the red part of the part on four axes.
-
Combination fixtures 组合夹具
$45.00Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nulla congue vitae sem nec fermentum. Maecenas tincidunt semper cursus. In sit amet posuere augue. Curabitur tempus nec justo et consequat. Aliquam non ex lectus. Etiam vel ultricies felis. In sed mauris felis. Duis egestas nec quam at vulputate. Nulla nec odio rhoncus, gravida mi congue, bibendum urna. Fusce vel iaculis tortor. Praesent lacus justo, blandit non molestie sit amet, iaculis vitae nunc. Ut sapien diam, lobortis non metus non, fringilla molestie ante. Mauris nisl quam, ultricies a fringilla ac, rutrum nec dolor. Cras luctus viverra odio.
-
differential carrier
differential carrier 夹具描述：夹具采用零件中心定位、凸轴角向定位、端面轴向定位，端面夹紧加工正上面各孔及凸台面。 Fixture description: The fixture adopts the central positioning of the parts, the angular positioning of the convex shaft, the axial positioning of the end face, the end face clamping processing is the above holes and the convex table.
-
differential carrier differential case pinion cage
夹具描述：夹具采用顶尖尾座支撑、三爪卡盘夹紧，四轴旋转加工轴侧面各孔。 Fixture description: The fixture is supported by the center tail seat, the three-jaw chuck is clamped, and the holes on the side of the shaft are rotated by four axes.
-
Differential case
夹具描述：夹具采用小端面内孔、大端面内端面定位，轴侧面通孔定角向，上端面夹紧方式加工上端面所有孔。 Fixture description: The fixture adopts the small end face inner hole, the large end face inner end orientation, the shaft side hole fixed Angle, the upper end face clamping method processing all the holes on the upper end face.
-
differential shell 差速器壳体
夹具描述：夹具采用两端面内孔定位、一端固定另一端夹紧方式加工轴面上孔。 Fixture description: The fixture adopts two internal hole positioning, one end fixed and the other end clamping method to process the shaft surface hole.
-
Disassembled switch upper seat Clamp
Product name: Back-mounted switch base Clamp description: The clamp uses a spring to expand the outer circle, the side angle is positioned, and the red part of the part is processed on the four axes.
-
Disassembled switch upper seat Clamp uses two claws
Product name: Disassembled switch upper seat Clamp description: The clamp uses two claws to clamp parts and process semicircular
-
-
Fixture clamp Bracket
Product name: Bracket Product name: Bracket Description of fixture: The fixture uses two V-shaped, a round hole and a support pin for positioning, and processes the red part of the part on four axes.
-
-
-
Front and rear cylinder block
夹具描述：夹具采用零件中心定位、菱形销角向定位、端面轴向定位，上端面夹紧加工各孔及凸台面。 Fixture description: The fixture adopts the central positioning of the parts, the angular positioning of the diamond pin, the axial positioning of the end face, and the upper end face clamping processing of the holes and the convex table.
